si3132 disappears after standby raid disk unavailable

FAQ

Profile

si3132 disappears after standby raid disk unavailable

Hardware Problem Solving Community! (Home) -> ABIT

Next: NF7S fails to power on

Author

Message

jmarkley

External

Since: Jan 02, 2007
Posts: 1

(Msg. 1) Posted: Tue Jan 02, 2007 9:57 pm Post subject: si3132 disappears after standby raid disk unavailable Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

i've got a aw8max mobo and i'm trying to use the si3132 raid controller. first of all, if i have it configured in the bios to be IDE, windows doesn't boot, and if i specify raid, (windows boots and i can configure a jbod for the one disk i have connected) after a standby cycle, the whole raid controller doesn't seem to be recognized. all access to the disk that's on that controller hangs. a reboot is required before the drive is visible again. i'm running bios 19 for the aw8max, and driver version 1231 from abit's website. has anybody else had standby problems with the si3132 on their aw8max or other abit mobo? >> Stay informed about: si3132 disappears after standby raid disk unavailable

Display posts from previous:

Related Topics:

TH7-II RAID shutdown/standby problems? - Hi, I have a TH7-II RAID motherboard which refuses to shut down via software, forcing me to flip the power switch or pull the plug each time I want to switch it off I'm running XP Pro, but the same problem occurs with other OSs. I've also tried two..

NF7-S SATA RAID-0, WD-SE: Anyone wanna compare disk benchm.. - Greetings Abit and Storage Newsgroup, I have just had a bit of spare time to finally do some proper tests on my SATA RAID-0 set-up. I was hoping that some of you out there would be able to run some tests yourself so we can compare results. Doesn't..

allocating disk space for RAID by using partion magic 8 - i would like to ask for your opinion with the following issue: migrated my RAID array by adding two new hard disks to a single logical drive.The migration was successful.Now i have some GIGAS of unallocated space i'd like to join to existing logical..

KT7A-RAID, Highpoint detects wrong disk size - I've flashed the latest ABIT BIOS (A9) modded with the latest Highpoint Driver. When I Ctrl-H into the Highpoint setup, it is detecting my 120GB Maxtor drives as only 9MB. I have each drive connected to a seperate channel. Both drives are detected..

IS7 can't put system on standby (S3) - I'm trying to suspend to RAM my system but everytime I put the system to standby it immediately comes back up. I can hear the HDD and fans power down but at approx 2 seconds everything powers back up. I've selected S3 in the BIOS, selecting S1 seems to....

	Hardware Problem Solving Community! (Home) -> ABIT	All times are: Pacific Time (US & Canada)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum